For AI agents: the documentation index is https://www.cellpostal.com/llms.txt. This page is also available as markdown at https://www.cellpostal.com/guides/how-to-address-an-envelope.md.
BETA

How to write an address on an envelope

By Al Davies · Updated

Short answer:

Write a letter · $5, postage included
Front of a letter envelope: return address top left, stamp top right, delivery address in the center (BASILIO [LAST NAME], [street address] APT [unit number], [CITY] [STATE] [ZIP CODE]), bottom strip kept clear for scanners
Where each part of the address goes on a letter envelope.

Put the name on line 1, the street address on line 2, and city, state and ZIP Code on line 3, all at the same left edge. USPS prefers uppercase and says punctuation may be left out except the ZIP+4 hyphen. As of October 27, 2026.

Where everything goes on the envelope

Three things share the front of the envelope. Each has its own spot.

SpotWhat goes therePlain tip
Top left cornerYour return addressSmall. Name, street, city, state, ZIP.
Top right cornerThe stamp or postageCheck the USPS page for the current postage amount.
Center and right of centerThe delivery addressThe biggest and clearest writing on the page.
Bottom edgeNothingLeave a clear strip for scanners.

USPS says the address must be on the same side of the mailpiece that carries the postage. It also names a recommended area for the address on a letter: from 1/2 inch in from the left edge to 1/2 inch in from the right edge, and from 5/8 inch above the bottom edge up to 2 3/4 inches above the bottom edge (USPS Domestic Mail Manual 202, section 2.1). Write inside that box and the scanners can read it.

The address, line by line

LineWhat to writeUSPS rule
1Recipient nameFirst element of the delivery address (DMM 602 section 1.3)
2Street and number, plus APT or STEUnit goes at the end of the delivery address line (Pub 28 section 213)
3City, state, ZIP CodeLast line of the block
All linesSame left margin"Uniform left margin" (Pub 28 section 212)
All linesUppercasePreferred (Pub 28 section 212)
PunctuationLeave outExcept the ZIP+4 hyphen (Pub 28 section 222)
Unit too long for line 2Put it on the line abovePub 28 section 213

All rows as of October 27, 2026.

The basic format

Keep every line at the same left edge. The name, street and city lines stack in the middle, and your return address sits small in the top left corner. Every address block has three parts, in this order, each on its own line:

An envelope with the return address top left and the recipient block in the middle, every line at one left edge.
Keep every line at the same left edge. The name, street and city lines stack in the middle, and your return address sits small in the top left corner.
  1. Recipient line: the person's name.
  2. Delivery address line: the street number and street name, plus an apartment or suite if there is one.
  3. Last line: city, state and ZIP Code.

Here is the shape, with placeholders:

BASILIO [LAST NAME]

[street address]

[CITY] [STATE] [ZIP CODE]

USPS Publication 28 says "Format all lines of the address with a uniform left margin." Keep every line starting at the same left edge. USPS also says "Uppercase letters are preferred on all lines of the address block," and that lowercase is acceptable if it meets postal guidelines for OCR readability. As of October 22, 2026, that is the current Publication 28 wording.

Where the delivery address goes

USPS says to place the intended delivery address on the line immediately above the city, state and ZIP Code line. The ZIP Code must be the correct code for that delivery address.

Punctuation

USPS says "With the exception of the hyphen in the ZIP+4 Code, punctuation may be omitted in the delivery address block." Its example shows an address with punctuation as acceptable and an address with no punctuation as preferred. If you write by hand, the plain version with no commas or periods is the one USPS prefers.

How to address an envelope, step by step

  1. Turn the envelope so the long edge is at the top. Write on the front.
  2. Start near the middle of the envelope, a little right of center. Write the person's name on the first line.
  3. On the second line, write the street number and street name. Add APT or STE and the number at the end of this line.
  4. On the third line, write the city, the two-letter state, and the ZIP Code.
  5. Check that every line starts at the same left edge.
  6. Write your own return address small in the top left corner.
  7. Put the stamp in the top right corner.
  8. Read the address once more against what the person gave you. Check the ZIP Code first.

What changes for each type of address

Two envelopes: a house address in three numbered lines, and an apartment address with APT [unit number] at the end of the street line. Both lines start on the same left edge.
A house address and an apartment address, line by line.

Lines 1 and 3 stay the same for almost every US address. Line 2 is the one that changes.

If the address isLine 2 looks likeUSPS rule
A houseStreet number, then street namePub 28 section 211
An apartment or suiteStreet, then APT or STE and the unitPub 28 section 213
A PO boxPO BOX and the box numberPub 28 section 281
A rural routeRR, the route number, BOX, the box numberPub 28 section 241
A business with one person to reachAn ATTN line goes on top, above the company nameSee the business and Attn guide below

For full sample addresses of every type, including college rooms and military mail, see US mailing address format, with examples: US mailing address format, with examples

How to address an envelope to an apartment

Put the apartment on the delivery address line, after the street. USPS says "Secondary address unit designators, such as APARTMENT or SUITE, are required to be printed on the mailpiece." It adds "The preferred location is at the end of the Delivery Address Line." The standard short forms are APT for apartment and STE for suite.

BASILIO [LAST NAME]

[street address] APT [unit number]

[CITY] [STATE] [ZIP CODE]

If the line is too long to hold everything, USPS says to "place secondary address information on the line immediately above the Delivery Address Line."

USPS also says the pound sign "should not be used as a secondary unit designator" when the correct designator, such as APT or STE, is known. If you do use a pound sign, leave a space between it and the number.

How to address an envelope to a married couple

The address block format stays the same, so only the recipient line changes. These name forms are suggestions from Cellpostal, not USPS rules. Two ways that fit on one line:

If the two names do not fit on one line, put each name on its own line above the delivery address line. Keep the delivery address line directly above the city, state and ZIP Code line. Several names on one envelope get more examples. See How to address an envelope to a family: How to address an envelope to a family

Where to put the stamp

Put the stamp in the top right corner of the front, on the same side as the address. USPS says stamps must be placed firmly in the upper right corner of the address side (Domestic Mail Manual 604, section 1.7). Leave room so the stamp does not touch the address. If a stamp covers part of another stamp, USPS may not count the covered one. For how much postage a letter needs, check the USPS page for the current amount.

No stamp on hand? See Can you mail a letter without a stamp: What happens when you send a letter without a stamp?

How to address an envelope to another country

Envelope to the UK: MR THOMAS CLARK, 117 RUSSELL DRIVE, LONDON W1P 6HQ, UNITED KINGDOM. Capitals on every line, post code next to the city, country alone on the last line, your return address top left, stamp top right.
A UK address, with the country on its own last line.

USPS has its own rules for mail that leaves the US. These come from the USPS International Mail Manual, section 122.1 Destination Address, on Postal Explorer (https://pe.usps.com/text/imm/immc1_008.htm). USPS may update them, so read that page before you rely on a detail.

What USPS says, in plain words:

  1. Write in ink or type. Pencil is not acceptable.
  2. Use the person's full legal name, the name on their government ID. Use roman letters and arabic numbers, and put the full address on one side of the item.
  3. Reserve at least the whole right half of the address side for the address, the postage and any labels.
  4. Write all lines of the delivery address in capital letters.
  5. Put the city in capitals with the post code next to it.
  6. Make the last line only the country name, written out in full with no short forms.
  7. If you can, keep it to five lines or fewer.
  8. Include the house number and street, or the box number, when the address is a town or city.
  9. Do not address mail to "Boxholder" or "Householder." Do not send mail to a person in one country "in care of" a person in another country.
  10. If the address is in Russian, Greek, Arabic, Hebrew, Cyrillic, Japanese or Chinese characters, add an English translation of the name and address, including the country. If you do not know the English, write the words in roman letters.

Here is the UK sample address the USPS manual prints. It is a USPS teaching sample, not a real person:

MR THOMAS CLARK

117 RUSSELL DRIVE
LONDON W1P 6HQ
UNITED KINGDOM

For Canada and Mexico samples, see the international section of US mailing address format, with examples: US mailing address format, with examples

Put your own name and address in the top left corner, in roman letters and arabic numbers. For how to send, price and customs, see How to mail a letter internationally: How to mail a letter internationally from the US

Cellpostal does not mail outside the US. Use this section for a letter you send yourself.

How to address a package

Top of a box with one label: From return address upper left, To delivery address lower right in bigger type, postage upper right. All three on the same side.
Return address, delivery address and postage all go on the same side.

A package uses the same address shape as an envelope. USPS says to put the address, the return address and the postage all on the same side of the package, and to put your own address in the upper left corner of the label (USPS "Address a package," usps.com/send/address-a-package-popup.htm). USPS also says a package label needs a complete return address and delivery address, written or printed clearly in ink that does not smear, with the ZIP Codes for both you and the recipient (USPS Publication 139).

Package label steps:

  1. Pick the biggest flat side of the box.
  2. Print or write your return address in the upper left corner of the label.
  3. Put the delivery address below it and a little to the right, in the same three-part shape.
  4. Put the postage on the same side.
  5. If the item is fragile, liquid or perishable, mark that clearly on the outside.
  6. Check the recipient's ZIP Code once more.

For a big flat envelope, see How to address a manila or large envelope: How do you address a manila or large envelope? For a box, see How to write a shipping address on a box: How to write a shipping address on a box

Common mistakes

  1. Dropping the unit to a fourth line under the city. The unit belongs on line 2, after the street.
  2. Guessing at the ZIP Code. USPS says it must be the right code for that delivery address, so look it up if you are not sure.
  3. Using a pound sign when you know it is an apartment. Write APT.
  4. Putting commas and periods everywhere. USPS says to leave punctuation out, except the ZIP+4 hyphen.
  5. Writing the address on the back or on the flap side. Put it on the same side as the stamp.
  6. Writing the return address in the middle or the bottom. Put it small in the top left corner.
  7. Crowding the bottom edge. Leave a clear strip for scanners.
  8. Slanted or tiny writing. Write straight, large and plain.
  9. Writing USA on a letter that stays in the US. Leave it off.
  10. Using a short form for the country on mail going abroad. USPS says to spell the country out in full.

Quick table: who is it going to

Each of these has its own page with more samples.

Sending toWhat changesGuide
A familyNames lineHow to address an envelope to a family
A widowTitle and nameHow to address a card or envelope to a widow
A widowerTitle and nameHow to address a card or envelope to a widower
A businessAdd an Attn lineHow to address an envelope to a business with an Attn line
A PO boxBox lineHow to address a letter to a PO box
An apartmentUnit on the street lineHow to address an envelope with an apartment number
A judgeTitle linesHow to address a letter to a judge
An attorneyTitle linesHow to address a letter to an attorney

Related guides

Or send it from your phone

Cellpostal prints and mails your letter, so you do not address the envelope by hand. You go to cellpostal.com on your phone or computer, type your letter, and sign with your finger. You can use the mic on your phone keyboard to talk instead of type.

Cellpostal sends to US addresses only, a street address or a PO box. Cellpostal cannot mail to APO, FPO or DPO addresses today.

A letter is $5 and a card is $7, postage included. Order at least 10 days before the day you want it there by. This is our suggestion, not a USPS promise. Cellpostal's own estimate: it prints and mails the next business day, and most mail arrives in 4 to 7 days. USPS does not guarantee a delivery date.

Cellpostal mails First-Class Mail. It is not certified mail. Cellpostal is not part of USPS and is not endorsed by USPS.

Where these rules come from

The format rules on this page come from USPS Publication 28, Postal Addressing Standards, sections 212 (Format), 213 (Secondary Address Unit Designators), 222 (Punctuation) and 215 (Dual Addresses). The line 2 table also uses sections 211, 241 and 281. The international block uses the International Mail Manual section 122.1. USPS may update them, so read the pages below before you rely on a detail.

More guides

Questions

How do you address an envelope?

Name, then street, then city, state and ZIP Code. Use one left edge, as of October 27, 2026.

Where does the apartment number go?

At the end of the delivery address line. USPS lists APT and STE as short forms.

Can I use a pound sign for the unit?

USPS says not when the correct designator is known.

Do I need commas?

No. USPS says punctuation may be omitted, except the ZIP+4 hyphen.

Where does the stamp go?

In the top right corner of the front, on the same side as the address.

Where does my return address go?

In the upper left corner of the front. USPS says a domestic return address goes in the upper left corner of the address side when a mailer asks for a service like Return Service Requested. It is also the usual place for every letter.

How do I address an envelope to another country?

Use capital letters on every line, put the post code with the city, and make the last line the country name spelled out. See the international section above.

How do I address a package?

Same three lines as an envelope. Return address in the upper left of the label, and the address, return address and postage all on the same side.

Should I write the address by hand or print it?

Either works if it is clear. USPS says to use ink that does not smear.

What goes on the very last line of a US address?

The city, the two-letter state and the ZIP Code. Leave the country off for mail that stays in the US.

Write a letter · $5, postage included

Sources

More guides

No printer at home? How to mail a letter without a printer